|
|
|
moving AirVision to a new PC
|
Step By Step Procedures
|
2 |
Friday, 4:37 PM EDT by
|
|
|
Thread started: Aug 17 2011, 11:03 AM EDT
Watch
The backup/restore procedures won't work between PC's. The SQL server error message is that the backup database set holds the backup of a different database than the current (that would be my new) AVDATA database.
So how do we move AirVision to a new PC? Maybe I will delete the current (new / empty) database and see if that will work.
Thanks,
Ben
out of
found this valuable.
Do you find this valuable?
Show Last Reply
|
|
Last Reply:
RE: moving AirVision to a new PC
By: ,
Friday, 4:37 PM EDT
We have a Continuity of Operations Plan (COOP) calling for us to maintain a "hot backup" of AirVision on a different computer stored at another location. It seems that a couple times a year we will have to create an external backup of our active AirVision system and duplicate it on the backup system (and then of course test the latter to verify that it runs as it should). Maybe in fact we should copy _every_ system backup to the COOP computer.) I would welcome a streamlined SOP for this activity if you or another user already has such.
This didn't matter to us very much before now, because we continued using E-DAS as our primary data acquisition system until just last month, when this year's ozone season opened. We must be almost the last Agilaire customer to give up E-DAS.
out of
found this valuable.
Do you find this valuable?
|
|
|
|
|
software page
|
Discussion Forum
|
0 |
Apr 26 2013, 12:53 AM EDT by
|
|
|
Thread started: Apr 26 2013, 12:53 AM EDT
Watch
A leading provider of credit risk and debt collections software solutions. Increase profits and reduce risk with CreditPoint.
0
out of
1 found this valuable.
Do you find this valuable?
Do you?
|
|
|
|
Entering PM Sample Data
|
Discussion Forum
|
1 |
Apr 11 2013, 1:06 PM EDT by
|
|
|
Thread started: Feb 1 2013, 10:46 AM EST
Watch
I am trying to get current sample data into AirVision. I need assistance if anyone has any spare time or any instruction sheets typed up they wouldn't mind sharing. We have tried using the Direct Poll device that we purchashed to poll from our instruments. That was not successful, and I am pretty sure we fried a 2025. Now I am just trying to get things such as Filter number, runday, temp, pressure etc. into AirVision. Is there anyone out there that is entering such data into the sample data fields in AirVision? If there is I would appreciate some input.
out of
found this valuable.
Do you find this valuable?
Show Last Reply
|
|
Last Reply:
RE: Entering PM Sample Data
By: ,
Apr 11 2013, 1:06 PM EDT
Just signed up with The AirVision Wiki so I don't know if you got an answer from Agilaire between now and when you posted your discussion topic. I have been putting PM sample data into Airvision for our NCore site like concentration, runday, temp, pressure, etc. for our designated and collocated PM 2.5 filters and PM10 in local and standard conditions as well as coarse 10-2.5. Let me know if you need some guidance on how to set up the templates or input the PM sample data. It isn't as straightforward as one might think.
out of
found this valuable.
Do you find this valuable?
|
|
|
|
|
Math Utility Pack
|
Discussion Forum
|
0 |
Feb 11 2013, 9:48 AM EST by
|
|
|
Thread started: Feb 11 2013, 9:48 AM EST
Watch
Could someone post some examples of equations that they are sucessfully using in the math utility pack? We have tried writing equations seveal different ways and keep getting errors. I don't care what the equation is for we have something wrong with our syntax. I would appreciate the help. Thanks!
out of
found this valuable.
Do you find this valuable?
|
|
|
|
Units (list editor)
|
Configuring Parameter Templates
|
0 |
Feb 1 2013, 5:58 PM EST by
|
|
|
Thread started: Feb 1 2013, 5:58 PM EST
Watch
AirVision as far as I can tell does not have a proper "unit" of Wind Direction. The only thing I see that might serve is "DEG", but this seems to be confusingly defined as a temperature with an unspecified scale. (Unfortunately, in NC we have gone along and tended to _use_ DEG as the unit of wind direction degrees.)
The corresponding EPA unit is {Unit=014, Description=Degrees Compass} [I would have preferred "Azimuth" for this description, but it's perfectly clear as it is.]
out of
found this valuable.
Do you find this valuable?
|
|
ORLANDOSALINAS |
|
need explanation of: "Null Code" flags
|
Flags Editor
|
0 |
Jan 8 2013, 3:09 PM EST by
ORLANDOSALINAS |
|
|
Thread started: Jan 8 2013, 3:09 PM EST
Watch
I am inputting data on the "Sample Data Editor" and had a question on how to use a "Null Code" for blank filters.
out of
found this valuable.
Do you find this valuable?
|
|
|
|
excluding some monitors from the AQI
|
Discussion Forum
|
0 |
Aug 28 2012, 4:37 PM EDT by
|
|
|
Thread started: Aug 28 2012, 4:37 PM EDT
Watch
We have three S02 monitors in our network. Two are special purpose and get reported to AQS but are not included in the AQI. How can I exclude monitors from the AQI? The AQI Program Editor appears to be paramater specific, not site specific. Thanks
out of
found this valuable.
Do you find this valuable?
|
|
|
|
Are version upgrades cumlative?
|
FAQs For Existing E-DAS/ATX Users
|
1 |
Sep 8 2011, 4:23 PM EDT by
|
|
|
Thread started: Sep 7 2011, 2:51 PM EDT
Watch
Based on release notes If issues and new features in version upgrades do not directly assist in how the product is used can an upgrade be skipped and upon the next release will it be cumlative? Also, what level of Ambient support is provided if support services are requested on an older version?
out of
found this valuable.
Do you find this valuable?
Show Last Reply
|
|
Last Reply:
RE: Are version upgrades cumlative?
By: ,
Sep 8 2011, 4:23 PM EDT
Good question- yes all of the releases are cumulative, so you can generally jump from one version to another, and the database update utility will figure out exactly what updates need to be applied.
Now, this is true if you are already starting from a 2.2- series version. If you have a 1.X, 2.0, or 2.1 version, the update scripts need to be manually applied first (per the installation instructions). Once you reach 2.2, it's all automated.
Also, after reaching 2.2.65, future updates to the Server will automatically cause the Clients to update on their next login, but this only happens once the Client has been updated to at least 2.2.65.
out of
found this valuable.
Do you find this valuable?
|
|
|
|
|
Switching from analog to serial with the 8816
|
Step By Step Procedures
|
0 |
May 16 2011, 9:27 AM EDT by
|
|
|
Thread started: May 16 2011, 9:27 AM EDT
Watch
Hay gang! I am in the process of converting one of our TEOM 1400 unit sites into a serial connection from the old analog connection. Steve, I lost my notes on what I need to do inside the data logger. I remember you said there was a red button I needed to press to reset the thing and then log in to configure channels or something like that. Can you refresh my memory? Thanks in advance!
out of
found this valuable.
Do you find this valuable?
|
|
|
|
Vaisala WXT520 hook up voa RS-232 COM Port to 8832 Worked
|
Vaisala
|
0 |
May 10 2011, 5:20 PM EDT by
|
|
|
Thread started: May 10 2011, 5:20 PM EDT
Watch
After a lot of tweeking we finally got all the data flowing.
Thanks to Steve, Rena'
Richard Tun
out of
found this valuable.
Do you find this valuable?
|
|
|
|
here is the error when trying to connect to TCPIP route direct to BAM
|
Client/Server Troubleshooting
|
5 |
May 5 2011, 3:29 PM EDT by
|
|
|
Thread started: Jan 13 2011, 2:27 PM EST
Watch
Rebex.Net.ProxySocketException: No connection could be made because the target machine actively refused it. ---> Rebex.Net.ProxySocketException: No connection could be made because the target machine actively refused it. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it 10.175.64.98:9886
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
at 328075837.13357030529.151169660(String , IPAddress , Int32 )
--- End of inner exception stack trace ---
at 328075837.13357030529.151169660(String , IPAddress , Int32 )
--- End of inner exception stack trace ---
at 328075837.13357030529.362804169(IAsyncResult , String )
at 328075837.13357030529.15613119759(IAsyncResult , Int32 )
at Rebex.Net.ProxySocket.Connect(String serverName, Int32 serverPort)
at 328075837.1960841591..ctor(Telnet , ShellChannelOptions , TerminalOptions , Int32 , Int32 )
at Rebex.Net.Telnet.Rebex.TerminalEmulation.IShellChannelFactory.CreateShellChannel(TerminalOptions options, Int32 columns, Int32 rows)
at Rebex.TerminalEmulation.TerminalControl.Bind(IShellChannelFactory factory)
at Rebex.TerminalEmulation.TelnetTerminalControl.Connect()
at AirVision.DataSources.Controls.TelnetControl.Connect(String host, Int32 port)
at AirVision.DataSources.Views.LoggerDownload.LoggerEmulationView.Connect()
out of
found this valuable.
Do you find this valuable?
Show Last Reply
|
|
Last Reply:
RE: Check your port number
By: ,
May 5 2011, 3:29 PM EDT
Current Date: 5/5/2011 1:52 PM
Daily Parameter Report
5/5/2011
0 1 2 3 4 5 6 7 8 9 10 11 12 Summary
Parameter SiteName Avg Max RDS
CO TRACE MCMILLAN .043 .044 .044 .044 .044 .044 .044 .044 .043 9
NO MCMILLAN 0 0 0
NO2 MCMILLAN 0 0 0
NOX MCMILLAN 0 0 0
NOY MCMILLAN 43.46 43.75 44.01 44.1 44.28 44.43 44.41 43.97 42.89 43.92 44.43 9
OZONE_PPB MCMILLAN 0 0 0
PM10_CONTIN MCMILLAN 54 5 9 9 6 9 35 46 39 37 41 54 32 28.92 54 13
PM25 MCMILLAN 6 6 5 3 4 5 7 10 6 2 3 3 3 4.8 10 13
PM25VOL MCMILLAN .7 .7 .7 .7 .7 .7 .7 .7 .7 .7 .7 .7 .7 .7 .7 13
PMCOARSE MCMILLAN 48 -1 5 6 2 4 27 36 32 34 38 51 29 23.9 51 13
SO2 MCMILLAN .04 .04 .04 .04 .04 .04 .04 .04 .04 .04 .04 9
Above is the last bit of hata polled from the BAM and some other data from the ESC8832 lost the formatting in the cut and past.
Telnet in to the b&B server when I set-up with a laptop from inside the trailers ethernet network. Works great.
out of
found this valuable.
Do you find this valuable?
|
|
|
ORLANDOSALINAS |
|
manual
|
Training
|
0 |
Mar 18 2011, 2:39 AM EDT by
ORLANDOSALINAS |
|
|
Thread started: Mar 18 2011, 2:39 AM EDT
Watch
Steve,
I want to know if you can send me a digital copy of the manual you gave to Chris Collins. It is called " Air Vision" version 2.1
out of
found this valuable.
Do you find this valuable?
|
|
|
|
2.2.2 Exec Service Restart issue
|
Discussion Forum
|
0 |
Mar 2 2011, 2:28 PM EST by
|
|
|
Thread started: Mar 2 2011, 2:28 PM EST
Watch
Anybody else getting an issue with restarting the server on version 2.2.2? Mine fails to completley restart the service. Steve and I think we know whats going on but I was curious if anyone else has had an issue. The AV service stops following a reset request and has to be manually restarted at the server to get AV back up.
1
out of
1 found this valuable.
Do you find this valuable?
Do you?
|
|
|
|
BAMs
|
Discussion Forum
|
2 |
Mar 2 2011, 2:09 PM EST by
|
|
|
Thread started: Nov 4 2010, 10:57 AM EDT
Watch
Any other BAM users out there? I have been eating sleeping and other bodily functioning these machines for the past year.
out of
found this valuable.
Do you find this valuable?
Show Last Reply
|
|
Last Reply:
RE: BAMs
By: ,
Mar 2 2011, 2:09 PM EST
Bob, Sorry to take so long to answer. Although I'm not intimately familiar with the combo BAMS, the feed for BP comes from the MetOne BP/AT BX-596 Ambient AT/BP Combo Sensor that is typically wired to Channles 6 and 7 on the back of the BAMs. This signal is typically not stored or logged by the BAM its simply used internally to adjust to the various sample condtions. To get external BP logged by the BAMs for collection I jumpered a wire from the sensor BP + input channel to the + side of one of the 6 programmable BAM logging channels on that BAM. Once you know the channel has the BP jumpered to it you simply have to indentify(count) that data point position in the data string output by the BAM and that is your Column # for your file import column mapping. Hope this helps I sent you a PM also.
out of
found this valuable.
Do you find this valuable?
|
|
|
desmogger |
|
Safe handle has been closed
|
Client/Server Troubleshooting
|
0 |
Jan 13 2011, 2:25 PM EST by
desmogger |
|
|
Thread started: Jan 13 2011, 2:25 PM EST
Watch
No connection could be made because the target machine actively refused it 10.175.64.98:9886
what does this mean cannot direct connect to any IP ADDRESS on routes
out of
found this valuable.
Do you find this valuable?
|
|
|
|
Data Editing
|
Discussion Forum
|
1 |
Nov 17 2010, 8:06 PM EST by
|
|
|
Thread started: Nov 4 2010, 3:57 PM EDT
Watch
I'm starting to use the data editor in AirVision. So far, it seems more complex than E-Das. I like how in E-Das, I can view and edit a whole month of data on one screen. In AirVision, I can view the data in this format in the matrix data screen, but it does not appear that data can be edited in this screen? In the Linear Data screen, it would be helpful if every time a data value was edited, it didn't take me back to the beginning of the month. It takes time to find where I left off. Also, can I edit the actual data values? For example, I have an ozone value of -0.001 ppm that needs to be changed to 0. Negative values cannot be uploaded to AQS. Advice?
out of
found this valuable.
Do you find this valuable?
Show Last Reply
|
|
Last Reply:
RE: Data Editing
By: ,
Nov 17 2010, 8:06 PM EST
Absolutely. In the matrix data editor, you can select, drag-select, or shift/ctrl-select cells, and right-click for editing functions.
I will check into the refresh in the data editor. I had not noticed that (I know it will refresh after each 'save', but you don't have to hit save after each individual edit).
For zero values, you can use the filter fields in any of the data editors to filter the data set down to values < 0, and then you can batch-edit the filtered results (changing the value AND applying the qualifier code), making it quick and easy to handle zero data.
1
out of
1 found this valuable.
Do you find this valuable?
Do you?
|
|
|
|
|
GSI Drivers - Copy
|
GSI Driver Editor
|
1 |
Nov 4 2010, 10:54 AM EDT by
|
|
|
Thread started: Oct 20 2010, 11:28 AM EDT
Watch
It would be useful to have an option to copy a driver so that a new one may be modified from an existing one instead of built from scratch.
out of
found this valuable.
Do you find this valuable?
|
|
|
|
SQL db management
|
Database Schema
|
0 |
Mar 10 2010, 11:44 AM EST by
|
|
|
Thread started: Mar 10 2010, 11:44 AM EST
Watch
In converting historical data (hourly and aux), I seem to have created a huge database (on the order of 30 GB?) Is it not the intention to have all data stored in one place? I see there is a SQL function "shrink database" or "shrink files" - is this recommended?
out of
found this valuable.
Do you find this valuable?
|
|
|
|
Report Format
|
Reports
|
0 |
Feb 26 2010, 1:05 PM EST by
|
|
|
Thread started: Feb 26 2010, 1:05 PM EST
Watch
Can the report format be edited i.e. with the report date (not current date) as a header on every page, and with page numbers? I found that if a day's data exceeds one page, the relevant date is not shown on subsequent pages.
out of
found this valuable.
Do you find this valuable?
|
|
|
|
AirVision Conversion Utility Version
|
Converting E-DAS Data
|
2 |
Feb 25 2010, 8:33 PM EST by
|
|
|
Thread started: Feb 24 2010, 9:39 AM EST
Watch
Is it important to use the newest version of the Conversion utility? I am having trouble uninstalling the version installed with the beta software (ver 1.0.1) but would like to use the version 9.0.21022.8 (?) supplied with the AirVision 1.0.2 software.
out of
found this valuable.
Do you find this valuable?
Show Last Reply
|
|
Last Reply:
RE: AirVision Conversion Utility Version
By: ,
Feb 25 2010, 8:33 PM EST
"After stopping SQL services, the Conversion software could be uninstalled and reinstalled from disc. The new install from 1.0.2 disc seems to be the same version as shown on this "Converting E-DAS Data" page." The main distinguishing feature between the 1.0.1 and 1.0.2 conversion utility is that the 1.0.2 utility adds the ability to convert Sample data, if I recall correctly.
out of
found this valuable.
Do you find this valuable?
|
|
