Use the form in Configuration Editors >Data Source Details

• Select the appropriate logger and double-click
• select the Communication tab
• select a logger from the pop-up screen

In the next screen:

• click on the first line of the table (Figure 3-14)
• select a logger from the drop-down list
• enter a Priority number, such as 1
• click in the boxes to select Polling and Emulation.
• click in the following line, then back in the first line so the asterisk turns into an arrow
• click the Save button.

>>Important: After you have finished making all configuration changes you must restart the AirVision service before your changes will take effect. Open Utilities > Server Restart. Be sure the Executive is selected and click Restart Executive Service in the upper left corner.

Figure 3-15 Associating Data Logger with TCP/IP connection to Driver in Configuration Editors > Server Configuration



Figure 3-16 Associating Data Logger with direct (serial) connection to Driver in Configuration Editors > Server Configuration


Figure 3-17 Associating Data Logger with modem connection to Driver in Configuration Editors > Server Configuration