>>Note: If you have a broadband connection to your site, by all means use it. TCP/IP connections are much easier and faster than modems.

Open the Logger in Data Source Details->(Logger) and select Communications

• click Add Route
• click the Add TCP Route button
• enter a Route Name, e.g., NKnox TCP,
• enter a Network Address, e.g., 172.16.1.240

The defaults are set for 8832 defaults, but can be changed based on your network/route definitions:

• Polling Port at 9881
• Emulation Port at 9887.

Click the Save button.


Figure 3-10 Remote TCP/IP Modem from Configuration Editors > Server Configuration